Description
Self-adhesive white paper labels on A4 sheets
Part number LL21, Label size 99.1mm x 139mm
White Perm Adhesive, Label Material – Matt Paper
Compatible with ink jet and laser printers
Equivalent Avery part number J8169
LL21 A4 Sheet Fed Laser Labels White Perm (500)
Web Price: £99.95 (Ex VAT)
- BOX OF 500 SHEETS OF STICKY LABELS
- PLAIN WHITE LABEL
- PERMANENT ADHESIVE
- LL21 PATTERN
- J8169 EQUIVALENT
- 1 LABEL PER SHEET
- 99.1mm x 139mm
Full Label Spec
Self-adhesive white paper labels on A4 sheets
Part number LL01SE, Label size 199.6mm x 289.1mm
White Perm Adhesive, Label Material – Matt Paper
Compatible with ink jet and laser printers
Equivalent Avery part number L7167
White paper with permanent adhesive
A white uncoated paper with a smooth finish, giving good print results using ink-jet & hot fusion toner systems (Mono & Colour). The material is designed for use on most laser printers & copiers especially mid to high-speed machines.
Face material properties
Grammage 68 gsm + or – 4%
Caliper (thickness) 78 microns + or – 5%
Tensile strength N/m 73 MD – 33 CD
Roughness PPS 10 5.0
Opacity 89%
Stiffness. ca 91 mN
Adhesive
A permanent, acrylic based adhesive with good tack & adhesion on a wide range of surfaces. Whilst maintaining good stability during laser printing.
Suitable for use on Dry, Non-Fatty food stuff according to ISEGA food stuffs certification.
Minimum application temp. +5 C
Storage range once applied -20 C to +80 C
Backing
A bleached kraft paper with good lay-flatness & stability
Thickness 55 microns
Grammage 55 gsm
Tensile strength kN/m 4.8 MD – 1.8 CD
Environmental & Handling.
Paper components are either ECF or TCF grade manufactured using pulp from sustainable, managed resources. All dimensions are nominal target specifications but may vary. All products within our range are manufactured to ISO 9001:2015 and BRC standards, the factory is also PEFC and FSC certified. The raw material laminates are also made to the same ISO standards as above and to ISO 14001.The product packaging is designed to maintain original ideal RH levels and will survive being stored in a wide range of temperatures, however, it is essential that the material is allowed to recover to normal print room temperatures for a min of 48 hours before use. Best print room conditions are 20 deg C and 50% RH.
Markets and Uses
This is an ideal product for General office labels for business and home office users.
Simple branding labels one or two colours or a simple logo – although the matt face paper will not lift the colours if you need a higher spec finish then please check out our Semi-Gloss or High Gloss materials.
This product is also ideal for barcode printing for warehousing or retail outlets.
Office Use, Retail, Warehousing, Home Office, Mailing
